Multiple PLC Trainer

Experiment List:

• The constriction of nine different categories PLC.
• Interfacing method of nine different categories PLC.
• Programming method of nine different categories PLC.
• Pick & Place using PLC & Pneumatic Air Suction method.
• Pick & Place using PLC & Pneumatic Gripper method.
• Water Pump Control using nine different categories PLC.
• Fire Indication System using nine different categories PLC.
• Traffic Light Control using nine different categories PLC.
• The constriction of Pneumatic cylinder.
• Sequential control of three Pneumatic cylinder using nine different categories PLC.
• The constriction of Pneumatic solenoid valve.
• Control of Pneumatic solenoid valve using PLC.
• Interfacing of PLC & Pneumatic solenoid valve.
• The method of Control Relay using PLC.
• The methods of three phase Induction Motor Starter using PLC.
• Forward-and-reverse operation methods of three phase Induction Motor.
• The method of interfacing PLC with Input Switch.
• The method of interfacing PLC with Input Sensor.
• Operating method of interfacing proximity sensor with PLC.
• Operating method of interfacing photo sensor with PLC.
• Use of Variable Frequency Drive with PLC.
• Programming method of Variable Frequency Drive with PLC.
• The construction of Three Phase Induction motor.
• Interfacing Method of Three Phase Induction motor with VFD & PLC.
• The construction of Stepper Motor.
• Interfacing Method of Stepper Motor with PLC.
• The construction Seven Segment Display.
• Interfacing Method of Seven Segment Display with PLC.
• Interfacing Power Supply with nine different categories PLC.

Technical Specification:

• Main Voltage : 1 Phase 220V / 50/60Hz
• Working Table: 1EA
• Working Frame – 3 Step
• Module Storage Cabinet : 2EA
• Electric accessories Storage Cabinet : 1EA
• Ari Compressor : 1EA
• Air compressor (basic equipment minimal machine): power: AC 220V±10% 50Hz/60Hz,motor power: 600W
• Nominal volume Air compressor: 9L normal output voltage 0.7 MPa, noise degree: 66 dB
• Dimension :L x W x H (mm):1735 x 700 x 1660
• Connection facility 2mm & 4mm Safety Socket

Module-RA401A-M01:

• PLC:SIEMENS
• Part Number: 6ED1052-1MD00-0BA8
• Programming Language: Ladder, Functional Flow Chart Diagram
• Built in Ethernet communication
• PLC Power supply: (1 No.)
• PLC Digital Input: 08
• PLC Analog Input: 04 Nos
• PLC Analog Output: 02 Nos
• PLC Digital output: 04
• PLC Display Unit : YES
• PLC Input Voltage: 24VDC, 1Amp
• Permissible range, Lower limit(DC): 20.4V
• Permissible range, Upper limit(DC): 28.8V
• Programming Software: LOGO Soft Comfort or equivalent
• Programming Cable: PLC to PC communication Cable
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M02:

• PLC: Mitsubishi
• Parts:FX3U-16MR-DS
• Power Supply: 24VDC
• Input Types:24VDC
• Output Types: Relay
• Communication Options: RS-232 • RS-485, RS-422, USB
• CPU Functions: High speed counters, 32 bit floating point math
• Program Memory Byte (Step): 128 K max. (64,000) Or higher
• Ambient Temperature: 0-55° C (in operation) -20 ±70° C (in storage)
• Ambient Humidity: 5-95% RH, no condensation (in operation)
• Noise Immunity: 1000 Vpp noise voltage, 1 ?s pulse width at 30-100Hz
• Digital Input: 8
• Digital Output :8 (Relay)
• Programming Software: Gx-Developer or equivalent
• Programming Cable: SC-09 or equivalent
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

    Module-RA401A-M03:

• PLC:Fatek
• Parts:- FBs-14MAR
• PLC input: 8 points Digital
• Triggering Power:24VDC
• (2 points high speed 100KHz,
• 2 points medium speed 20KHz,
• 4 points medium speed total 5KHz);
• PLC Output: 6 points relay
• Communication Port:RS232/USB
• Built-in power supply: SPW14-AC/D12/D24
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

  Module-RA401A-M06:

• PLC: Allen Bradley
• PLC: Allen Bradley
• Parts No: Micro820
• PLC Digital Input:12 Nos
• PLC Digital Output:07 Nos
• PLC Analog Input:04 Nos
• PLC Analog Output:01No
• 20-point controllers
• Pants:micro820
• Provides embedded 0…10V non-isolated 4 channel analog input and 1 channel analog output for speed control of an AC drive
• Provides embedded communications via non-isolated serial port (for RS-232 and RS-485 communications) and Ethernet port
• Communicates via EtherNet/IP™
• Provides embedded microSD^TM slot for program transfer, datalog, and recipe management
• Provides embedded support for up to four 10k thermistor temperature inputs
• Supports program download through USB with an optional 3.5-in. Remote LCD
• Supports up to two Micro800^®Plug-in Modules
• Programming Cable: PLC to PC communication Cable
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M07:

• PLC: LS
• Parts: XBC-DR30SU
• Power Supply=220 V AC
• Digital Input  =18
• Digital Output=12(Relay)
• Triggering Voltage:24VDC
• Programming Cable: PLC to PC communication Cable
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M08: PLC: Schneider Electric

• • Parts: SR3B101BD/ AFPX-C40R
  • Built in display : LCD
  • High-speed Operation
  • Number or control scheme lines
  • Maximum Number of I/O Points:

  0…500 with FBD programming

  0…240 with ladder programming.

  • Cycle time : 6…90 ms
  • Backup time : 10 years at 25 °C
  • Checks : Program memory on each power up
  • Supply voltage limits : 19.2…30 V
  • Discrete input voltage : 24 V DC
  • Discrete input current : 4 mA
  • IP degree of protection : IP20 (terminal block) conforming to IEC 60529
  • Mechanical durability : 10000000 cycles (relay output)
  • Output thermal current : 8 A for all 4 outputs (relay output)
  • Discrete input number : 6 conforming to EN/IEC 61131-2 type 1
  • Programming Cable: PLC to PC communication Cable
  • Connection facility 2mm & 4mm Safety Socket

Module-RA401A-M08B: (Optional)

• PLC: Panasonic
• Parts: AFPX-C40R

• High-speed Operation
• Large Capacity Program Memory
  FP-X,   32k steps*2 program memory,
  Independent Comment Memory
• Maximum Number of I/O Points
  Up to eight expansion units can be connected to one control unit; the maximum number of I/O points is 300. the number of I/O points can be increased to 382.
• Built-in 4-axis Pulse Output
• Modbus-RTU

• Power Supply=220V AC
• Digital Input=24
• Digital Output=16

• Programming Cable: PLC to PC communication Cable
• Connection facility 2mm & 4mm Safety Socket

Module-RA401A-M09:

• PLC :Wecon
• Parts: LX3V-0806MR-A2
• Power Supply=220VAC
• Digital Input=8
• Digital Output=6 (Relay)
• Triggering Voltage:24VDC
• Programming Cable:  PLC to PC communication Cable
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M10: PLC Pick & Place using  Pneumatic Air Suction

• Base Plate: Aluminum Profile
• Structure: Aluminum Profile
• Function Indicator: Tower Type (Red, Green, Yellow)
• Carry Function: Using Air suction method
• Pneumatic cylinder: 02 Pcs
• Optical Fiber Sensor:02 set
• Solenoid Vaulve:3 pcs
• Cabinet control circuit power supply: DC24V
• Temperature: -10 ~ 40 ; Humidity: ?90% ;
• Air pressure: 0.4 ~ 0.6Mpa
• Input power : single-phase, three-wire AC 220V±10% 50Hz/60Hz
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):600 x 460 x 20

Module-RA401A-M11: PLC Pick & Place using Pneumatic Grippe

• Base Plate: Aluminum Profile
• Structure: Aluminum Profile
• Function Indicator: Tower Type (Red, Green, Yellow)
• Carry Function: Using pneumatic gripper method
• Pneumatic cylinder: 02 Pcs
• Optical Fiber Sensor:02 set
• Solenoid Vaulve:3 pcs
• Cabinet control circuit power supply: DC24V
• Temperature: -10 ~ 40 ; Humidity: ?90% ;
• Air pressure: 0.4 ~ 0.6Mpa
• Input power : single-phase, three-wire AC 220V±10% 50Hz/60Hz
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):600 x 460 x 20

Module-RA401A-M12:

Water Pump Control

• Base Plate: Aluminum Profile
• Water Chamber: Upper And Lower
• Water through: Solenoid Valve
• Water Pump: 5W
• Operating Voltage : 24V
• Connection facility 2mm & 4mm Safety Socket
• Module Dimension :L x W x H (mm):600 x 460 x 20

Module-RA401A-M13:

Fire Indication System Module:

• Smoke Sensor
• Interfacing PLC and DC power supply Connection facility
• Interfacing facility With water level control Module
• Operating Voltage : 24V
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M14:

Traffic Light Control Module:

• Built-in ,Green, Yellow, Red Indicator for interface PLC and DC power supply Connection facility
• Operating Voltage : 24V
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M15:

Pneumatic Control

• Pneumatic cylinder: 3EA (minimum)
• Temperature: -10 ~ 40 ;
• Humidity: ?90% ;
• Air pressure: 0.4 ~ 0.6Mpa
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M16:

 Pneumatic solenoid valve:

• Pneumatic solenoid valve: 3EA
• Operating Voltage : 24V
• PLC connection point : 3EA
• PLC connection point facility 2mm/4mm Safety Socket
• Interfacing facility Pneumatic control Module
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M17:

Relay Control Module:

• Double pole Double Through Relay: 04 Set
• Relay Operating Voltage:24V
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M18:

 Motor Starter module:

• Magnetic Contact switch:02 nos
• Star Delta Status Indication facility
• Relay Operating Voltage:220V~240VAC
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M19:

 Input Switch Module:

• Pushbutton Switch:04 Nos
• Push on Push Off Switch: 04 Nos
• Relay Operating Voltage:24VDC
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M20:

Sensor module:

• Proximity Sensor:02 Nos
• Photo Sensor:02 Nos
• Thermocouplar:02 Nos
• Operating Voltage:24VDC
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M21:

Output Indicator Module:

• Output Indicator:04 Nos
• Operating Voltage:220V~240VAC
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M22:

Variable Frequency Drive Module

• Variable Frequency Drive:01 No
• Input Three Phase/Single Phase
• Output Three Phase 220VAC (PWM)
• Capacity:400watts
• Input Operating Voltage:220V~240VAC
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M24:

Stepper Motor Control Module

• Unipolar Stepper Motor:01 No
• Bipolar Stepper Motor:01 No
• Input Operating Voltage:5V/12V
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M25:

Seven Segment Display module:

• Seven Segment Display:02 no

• Input Operating Voltage:5V/12V
• PLC connection point facility 2mm/4mm Safety Socket
• Module Dimension :L x W x H (mm):295 x 225 x 45

Module-RA401A-M26:

Power Supply Module:

• Input Operating Voltage:220V~240VAC
• Output AC Voltage:220V,50Hz
• Output DC Voltage:5V(1Amp),12V(1Amp),24V(1Amp)

• PLC connection point facility 2mm/4mm Safety Socket

• Fuse for Safety protection facility

Accessories:

• Air Compressor-01 no
• Connecting jack: 01 Set
• Power Cable: 01 no
• PLC to PC Communication cable: 09 Sets
• English Manual & CD: 01 Set
• Working Table: 01 Set
• Computer (Optional)